Pipe Network - Move Pipe End

Last updated: 2022-02-09

Total video time: 10:49

Overview

mov-pip-end-01.mp4 10:49

This command will move a pipe end to a location at a specified elevation. That elevation will be assigned by snapping to the X, Y, and Z coordinates of an object.

Usage

WisDOT Design tab > Design panel > Pipe Network menu > Move Pipe End

The tool can also be accessed from the Pipe Object right-click menu or via the command line: DOTMOVEPIPEEND

The process for pipe placement must be complete up to Place metal culvert pipe #metal

1. Select the Pipe End to Move: Select end of pipe

   Warning: Make sure to select closer to the end to move.

2. Snap to new location: Select pipe reference location: [B=Bottom, F=Flowline, C=Centerline, R=Crown, T=Top]: Select which part of the pipe should go to the selected location.

   Warning: Moving the pipe end will disconnect it from any structure, it will need to be reconnected.