Export cross section slope stake files

Last updated: 2023-09-27

Create cross section slope stake reports for all proposed Datum surfaces in the plan.

cntrctr-data-xprt-xs-slp-stk-01.mp4 3:13

Civil 3D 2020 and later

This report creates an .xlsx file of breakpoints on a surface along the sample lines of an alignment.

See Contractor Data - Slope Stake Report for more information.

Civil 3D versions prior to 2020

Tool Used: Toolspace > Toolbox tab > WisDOT Toolbox > WisDOT Reports > Other Reports > right-click on Slope Stake > choose Execute

Input file: < Project_ID >\sheets\090102-xs.dwg

Output file: < Project_ID >\const\CD-Design\CD-X-Section\ < Construction_ID >-Slp-Stk-< Ali >-< Const-Stg >.csv

The Slope Stake report requires a drawing that has:

  • an alignment
  • sample lines
  • a surface

Tip: If any of these are data shortcuts and the report does not work, save a copy of the file, promote the objects, and run the report from the copy drawing.

Steps

  1. Open drawing file 12345678\sheets\090102-xs.dwg
  2. Slopestake Report dialog box
    1. Baseline Alignment: STH25
    2. Sample Line Group: SLG-STH25
    3. Surface: Rfnt-STH25-All-Datum
    4. File name: Browse, 12345678\const\CD-Design\CD-X-Section\98765432-Slp-Stk-STH25.csv
    5. Create Report

If the Excel file opens, review it then close it.