Data for Construction - Superelevation Report

Last updated: 2024-06-27

Overview

This command creates an .xlsx report of superelevation rates and their stations for a centerline alignment.

Usage

WisDOT Design tab > Output panel > Data for Construction menu > Superelevation Data

The command can also be accessed from the command line: DOTREPORTSUPERELEVATION.

1. Select Alignments: All alignments with superelevation data in the drawing are listed. In the Selection column, check the alignments to export. All alignments can be checked with Select All.
2. In the # of Lanes column, select whether to report the superelevation data as 2 Lane or as 4 Lane.
   1. The 2 Lane option reports the following columns from the superelevation definition: Left Outside Shoulder, Left Outside Lane, Right Outside Lane, Right Outside Shoulder.
   2. The 4 Lane option reports the following columns from the superelevation definition: Left Outside Shoulder, Left Outside Lane, Left Inside Lane, Right Inside Lane, Right Outside Lane, Right Outside Shoulder.
3. Click the folder icon to open the Save File As.. dialog.
4. Save
5. Create Report
6. The report will auto-open in Excel. Each selected alignment will be reported on a separate worksheet.

Sample report

Superelevation-25.xlsx