Data for Construction - Structures To Point LandXML

Last updated: 2024-06-27

Overview

The command creates a COGO Point LandXML file from pipe network structure data. It collects the information from the pipe network structures only (pipes or culvert data is not collected by this command). The output is a LandXML file containing a COGO point entry (Point Name, Northing, Easting, and Elevation) for each structure in a pipe network.

Usage

WisDOT Design tab > Output panel > Data for Construction menu > Structures To Point LandXML

The tool can also be accessed from the command line: DOTSTRUCTURESTOPOINTXML.

  1. Structures to Cogo Point XML dialog box will appear. Select pipe network(s).Use Shift or Ctrl buttons to select multiple pipe networks.

    Info: If more than one pipe network is selected, the structure data from all selected pipe networks is exported to one single XML file.

  2. Click the folder icon to open the Save File As.. dialog.

  3. Save

  4. Create XML (A XML file will be created in the save location.)

  5. OK

  6. Close to exit.

Sample report

StructuresToPoints.xml