Profile View - Profile View Elevation Range

Last updated: 2022-02-09

Overview

This command will adjust the minimum and maximum elevation for any number of profile views.

Usage

WisDOT Design tab > Design panel > Profile View menu > Profile View Elevation Range

The tool can also be accessed from the Profile View Object right-click menu or via the command line: DOTPROFILEVIEWELEVRANGE.

There is no dialog box for this command.

  1. Select Profile Views: Select the profile views to be adjusted in the active drawing.
  2. Enter
  3. Enter Minimum Elevation [Same]: Type the minimum elevation. Enter
    • Click Same to keep the current minimum elevation.
  4. Determine height by [New Same Elevation]:
    • Click New
      • Enter desired height: Type the total height (difference between the minimum and maximum elevation). Enter
    • Click Same to keep the current maximum elevation.
    • Click Elevation
      • Enter maximum elevation greater than (minimum elevation entered): Type the maximum elevation. Enter