Editing points

Last updated: 2021-06-29

Total video time: 06:22

Using grips to edit points

Selecting a COGO point gives 2 grip points.

1. Rhombus/diamond grip point
   1. Select to move point or hover over grip > Move Marker
   2. hover over grip > Rotate Marker (rotates only marker and leaves label alone)
   3. hover over grip > Rotate marker and label (rotates both marker and label together)
   4. If any of these options were used, hover over grip > Reset options available
2. Square grip point
   1. Select to move and get a leader line, Esc to cancel
   2. hover over grip > Rotate Label (rotates only label and leaves marker alone)
   3. hover over grip > Toggle sub item grips (allows you to move each component; point number, point description, and point elevation)
   4. If any of these options were used, hover over grip > Reset options available

Editing points from data

Editing points number from data

1. Toolspace > Prospector tab > select Points

2. In Toolspace Preview window, Right-click on a point > Renumber… (allows adding a factor to elevation)

3. Enter an additive factor to point numbers: 10000 Enter:

   Info: Right-click Points > Refresh to update Preview Window.

Editing point elevation from data

1. Toolspace > Prospector tab > select Point Groups > Survey User-Defined

   Info: If point isn't in Toolspace Preview list, right-click Survey User-Defined > Update (populates new point numbers to list).

2. In Toolspace Preview window, Right-click on new point 10001 > select Datum… (allows adding a factor to elevation)
3. Change in Elevation: 900 Enter

Editing point elevation from surface

1. Toolspace > Prospector tab > select Point Groups > Survey User-Defined
2. In Preview window
   1. Right-click on new point 10001 > select Elevation from Surface…
   2. Select surface dialog box, 2 options :
      1. Select a surface from dropdown list, Exist, OK
      2. Select from Screen icon
         1. Select Exist surface, OK