Planting detail sheet

Last updated: 2026-01-06

Example sheet: 023101-pl.pdf
  1. Create Plan Sheet (similar to plan/profile sheet workflow here): Plan/profile sheet
    1. Create sheet
      1. Create sheet file 023101-pl.dwg
      2. XREF edgeline files
      3. Add All Components
      4. Add sheet layouts at 20 scale
    2. Or Create multiple sheets
      1. Create or use view frame group
      2. Create multiple sheets along project from VFG
  2. Place hatching for concrete or other materials
    1. Depending on the XREF of edgeline file you may need to NCOPY the edges of hatching edges into the file.
    2. Typical Section palette > Material Hatching tab
      1. Or Home > Draw > Hatch
  3. Place planting blocks
    1. Mleader 070-CIRCLE TAG, place one, remove leader, then copy for each needed planting marker.
      1. For different size plantings explode one of the mleader texts, scale command to adjust proper size, double-click to edit the attributes and change the text size to 1.4 or what is appropriate.
  4. Place label tags
    1. Mleader 070-HEX TAG
      1. Planting bed type and number (ex: M-13 for 13 of the total M-type planting being in an area)
  5. Place legend for tags and blocks
    1. Draw lines where legend table will be located.
    2. Copy one of each planting blocks and label tags.
    3. MTEXT for notes, planting number, and descriptions
  1. Planting Detail sheet (similar to construction detail sheet here): Construction details sheet
    1. Details drawing
    2. Mleader text
    3. Detail titles
    4. Plant schedule and material schedule tables.
    5. General Notes